Advantages
Above-ground storage tanks are designed for storing various liquids, aggressive substances and chemicals, wastewater and feces, granulates, and products for food purposes. Tanks can be manufactured as health harmless, allowing contact with food.
Above-ground tanks are made from structural plates of integral polypropylene and are designed for placement on the floor, at ground level.
They are standardly equipped with a plastic lid.
They can be equipped with technological partitions, various pipe connection holes, nozzles, drain valves, etc. They are watertight in terms of ČSN 75 0905.
Rectangular Above-ground Self-supporting Plastic Tanks (encased in iron frames)
Model | Net
Volume m3 |
Dimensions |
Weight kg |
||
---|---|---|---|---|---|
length L | width B | height H | |||
mm | mm | mm | |||
HNS 111 | 0.84 | 1160 | 1000 | 1100 | 160 |
HNS 112 | 1.68 | 1160 | 1000 | 2100 | 320 |
HNS 211 | 1.68 | 2160 | 1000 | 1100 | 270 |
HNS 212 | 3.36 | 2160 | 1000 | 2100 | 570 |
HNS 312 | 5.04 | 3160 | 1000 | 2100 | 770 |
HNS 222 | 7.36 | 2160 | 2000 | 2100 | 890 |
HNS 322 | 11.04 | 3160 | 2000 | 2100 | 1120 |
HNS 422 | 14.72 | 4160 | 2000 | 2100 | 1370 |
We also offer the conversion of existing tanks and containers as a specialty. This is often the cheapest and most sensible solution.
To date, we have been able to implement over 140 systems in Switzerland and more than 10 abroad.
Rectangular Above-ground Self-supporting Plastic Tanks (without iron frames)
Model | Net
Volume L |
Dimensions |
Weight kg |
||
---|---|---|---|---|---|
length L | width B | height H | |||
mm | mm | mm | |||
HNS 0.18 | 180 | 800 | 500 | 500 | 36 |
HNS 0.55 | 550 | 1000 | 600 | 1000 | 55 |
HNS 0.75 | 750 | 1000 | 800 | 1000 | 63 |
HNS 0.92 | 920 | 1000 | 1000 | 1000 | 82 |
The tanks have been tested and approved by the state testing laboratory TZÚS Prague.
Cylindrical tanks are closed tanks made of polypropylene. They are manufactured as a single piece, by welding technology.
The installation is always performed on a base concrete slab with min. flatness of +/- 5 mm in both directions.
For the necessity of larger volumes, tanks can be interconnected into an assembly of multiple tanks.
Above-ground cylindrical tanks are designed for above-ground, freestanding installation. The wall thickness is calculated for a liquid density of 1000 kg/m3 (water).
In case of using tanks for liquids or chemicals with a greater density, it’s necessary to consult with the manufacturer (to recalculate whether the standard wall thickness is sufficient).
They are watertight in terms of ČSN 75 0906.
The tanks have been tested and approved by the state testing laboratory TZÚS Prague.
Cylindrical above-ground tanks can be equipped on request with:
Cylindrical Tanks – Above-ground Self-supporting (smaller volumes)
Model | Volume (l) | Dimensions | Weight
kg |
|
---|---|---|---|---|
tank diameter | height | |||
mm | mm | |||
VNS – 0.3 | 280 | 600 | 1000 | 20 |
VNS – 0.6 | 600 | 800 | 1200 | 35 |
VNS – 0.8 | 780 | 1000 | 1000 | 45 |
VNS – 1.2 | 1170 | 1000 | 1500 | 55 |
Cylindrical Tanks – Above-ground, Self-supporting (larger volumes)
Model | Volume (m3) | Dimensions |
Weight kg |
|
---|---|---|---|---|
tank diameter | height | |||
mm | mm | |||
VNS – 2.3 | 2.26 | 1400 | 1540 | 120 |
VNS – 3.0 | 2.96 | 1600 | 1540 | 140 |
VNS – 3.5 | 3.46 | 1500 | 2040 | 150 |
VNS – 4.0 | 3.94 | 1600 | 2040 | 160 |
VNS – 5.0 | 5.00 | 1800 | 2040 | 200 |
VNS – 6.2 | 6.18 | 2000 | 2040 | 230 |
VNS – 7.2 | 7.15 | 2150 | 2040 | 250 |
VNS – 8.0 | 7.84 | 2250 | 2040 | 270 |
VNS – 9.0 | 8.93 | 2400 | 2040 | 300 |
VNS – 10.0 | 9.64 | 2250 | 2500 | 300 |